Lexmark Embedded Double Logon


Issue:

The Lexmark Embedded software is prompting for login credentials twice.

Solution:

There is likely an Access Control setting that is set to PrintAudit which should not be. To check this login to the device’s web page and go to the Access Controls and verify that only the correct functions are set to PrintAudit.

  1. Login to the browser page
  2. Click on Settings
  3. Click on Other Settings
  4. Click on Security Setup
  5. Click on Access Controls, you will find this in the Advanced Security Setup area.
  6. Make sure only the following access controls are set to PrintAudit:
    1. Flash Drive Print
    2. Flash Drive Scan
    3. Copy Function
    4. Email Function
    5. Fax Function
    6. FTP Function
How did we do with this article?