Upgrading Print Audit Reporting Tools

These instructions are for upgrading a PA6.x.x installation to a newer version of PA6.x.x.
  1. Download the latest version of the software from here: http://www.printaudit.com/software-updates.asp?id=1. Be sure you save the file to a location you will be able to find later.
  2. Launch PA6setup.exe.
  3. Click on “Print Audit 6 Setup”.
  4. If there is an older version installed you will see the following message:
    Update.jpg 10.17 KB
  5. Click on “Yes” to upgrade the program.
  6. If the version of Print Audit 6 you are attempting to install is older than the current version, you will receive the following dialog:
    NewVersion.jpg 9.4 KB
  7. If the Print Audit Client is installed on the machine, you will receive a message asking you to restart the computer. 

  An upgrade of the Print Audit software should not require a restart of the computer unless:

  • the Print Audit Client has been installed on the computer.
  • the upgrade process is unable to release a file from memory.

In either case, a reboot of the computer is recommended as soon as possible.

How did we do with this article?