- Knowledge Base
- Where to find RAK documentation
-
General Articles
- Rapid Assessment Key (RAK)
- Rapid Assessment Key Technical/Security Overview
- Does the RAKv2 have RoHS Certificate of Compliancy
- Do we track toner levels from devices without chips in the toner cartridges?
- How is the toner coverage calculated in the RAK toner coverage reports?
- How to activate your Rapid Assessment Key v2
- How to create a toner coverage report
- How to do a Walk with the Rapid Assessment Key
- How to export and import RAKv2 scans
- How to scan a specific set of devices with the Rapid Assessment Key
- Important Notice about Future RAK Updates
- Is it possible to export a Rapid Assessment Key scan, edit the file to remove a printer from the scan then re-import the file?
- RAKv2 Network Traffic Specifications
-
Troubleshooting Articles
- When running the Rapid Assessment Key, a webpage and error shows up.
- Drive Letter Conflict with Rapid Assessment Key
- How to retrieve the Key Identifier information
- How to unlock the RAKv2
- I am trying to open the Quick Start Guide, Customer Takeaways and Print Audit Resources documents, but nothing happens.
- I received the following error when running the key, how can I fix this? 'CDBQuery::Execute - unable to open database file'
- Negative Page Counts being reported by in Infinite Device Management or the Rapid Assessment Key
- Non-HP devices reported as an HP device
- Nothing happens when I click Perform a scan
- RAKv2: The RAK needs to be re-licensed continually
- Rapid Assessment Key Error: One of the core scripts could not be loaded: no such table: tblScripts
- Rapid Assessment Key Log File - ScanErrors.txt
- Rapid Assessment key report paper size
- Rapid Assessment Key v2: A device has missing or incorrect information
- Rapid Assessment Key v2: Devices aren't being scanned
- Rapid Assessment Key v2: Logging
- Rapid Assessment Key v2: Scans take too long
- What are Universal Drivers and how do they affect the RAK key?
- What is the IP address of the Licensing Server
RAKv2 Network Traffic Specifications
RAKv2 Network Traffic during a Scan
- The RAKv2 does not create any network traffic until a scan is initiated.
- Once a scan has been initiated, the RAKv2 will create approximately 30 to 50 KB of bidirectional network traffic per device scanned.
- The RAKv2 uses the RAM on the host computer to operate and does not write any information to the computer's disk drives.
How did we do with this article?
Rapid Assessment Key
- Knowledge Base
- Where to find RAK documentation
-
General Articles
- Rapid Assessment Key (RAK)
- Rapid Assessment Key Technical/Security Overview
- Does the RAKv2 have RoHS Certificate of Compliancy
- Do we track toner levels from devices without chips in the toner cartridges?
- How is the toner coverage calculated in the RAK toner coverage reports?
- How to activate your Rapid Assessment Key v2
- How to create a toner coverage report
- How to do a Walk with the Rapid Assessment Key
- How to export and import RAKv2 scans
- How to scan a specific set of devices with the Rapid Assessment Key
- Important Notice about Future RAK Updates
- Is it possible to export a Rapid Assessment Key scan, edit the file to remove a printer from the scan then re-import the file?
- RAKv2 Network Traffic Specifications
-
Troubleshooting Articles
- When running the Rapid Assessment Key, a webpage and error shows up.
- Drive Letter Conflict with Rapid Assessment Key
- How to retrieve the Key Identifier information
- How to unlock the RAKv2
- I am trying to open the Quick Start Guide, Customer Takeaways and Print Audit Resources documents, but nothing happens.
- I received the following error when running the key, how can I fix this? 'CDBQuery::Execute - unable to open database file'
- Negative Page Counts being reported by in Infinite Device Management or the Rapid Assessment Key
- Non-HP devices reported as an HP device
- Nothing happens when I click Perform a scan
- RAKv2: The RAK needs to be re-licensed continually
- Rapid Assessment Key Error: One of the core scripts could not be loaded: no such table: tblScripts
- Rapid Assessment Key Log File - ScanErrors.txt
- Rapid Assessment key report paper size
- Rapid Assessment Key v2: A device has missing or incorrect information
- Rapid Assessment Key v2: Devices aren't being scanned
- Rapid Assessment Key v2: Logging
- Rapid Assessment Key v2: Scans take too long
- What are Universal Drivers and how do they affect the RAK key?
- What is the IP address of the Licensing Server